connect your GW2358 or compatible device using the serial port at baud rate 115200. support for other gateworks devices will follow soon.
i'm waiting right now for the arrival of some test devices

enter the boot loader by pushing ctrl+c

now type:
ensure that a tftp server is running on your configured tftp server location within the bootloader. otherwise change the bootloader
network settings to your location. consider to plugin the network cable on ETH0

instructions for GW2358-4 or generic 8/16/32 mb flash devices

fis unlock -f 0x50000000 -l 0x2000000
fis init
load -r -v -b 0x00800000 linux.bin
fis create linux


consider to configure the boot script
fis load linux
exec
using fconfig


one time installed, future upgrades can be done with the webinterface using the gateworx-firmware-squashfs.bin binary

consider that this firmware must be registered. keys can be obtained within our shop at www.dd-wrt.com
if you want to receive one single free evaluation key, just contact us at info@dd-wrt.com